|
Roving For Filament
Winding Or Pultrusion
Roving for filament winding or pultrusion is specially designed as
reinforcements for thermoset resin used in pultrusion and filament
winding processes.The end products are filament wound pipes,filament
winding stick,pressure vessels,tent rods,gratings and other
complicated parts,etc.
Technical Requirements:
R2O Content：<0.8%
Compatible resin：Polyester&vinylester
Filament diameter：9μm-16μm
Moisture：≤0.1%
Loss on ignition：0.55%±0.2%
Product Characteristics:
Even tension
Fast and complete wet-out
No fuzz
Excellent mechanical properties
Product Specification:
|
Product code
|
TEX |
Filament
diameter(μm)
|
Compatible resin
|
Applicable process |
|
EC16-2400 |
2400
|
16
|
UP
|
Filament
winding/Pultrusion |
|
EC13-2400 |
2400
|
13
|
UP
|
Filament
winding/Pultrusion |
|
EC16-4800 |
4800
|
16
|
UP
|
Filament
winding/Pultrusion |
Special products are according to customer's requirement.
Individual and bulk packaging:
Each cheese of EC is protected by a plastic bag,if
required,thermoplastic bag also can be used,than covered by a box
with the size of 278mm×278mm×273mm;net weight is 19.5kgs to 20.5kgs.
Each pallet which size is 1100mm×1100mm×120mm contains 3 or 4
levels of 16 cheeses.
Static stacking the pallets is possible up to two high.
Vetrocreel packaging is available on request.
Storage:
EC roving should be stored dry and in its original packaging.The
best conditions are temperature between 10℃ to 35℃ and at a relative
humidity between 35% to 55%.
|
