|
Roving For Sheet
Molding Compounds
Introduction:
SMC roving is specially designed as reinforcements for thermoset
resin used in sheet molding compounds to product automobile
parts,doors,seats,bath tubs,water storage tanks,and sporting
tools,etc.
The SMC roving,treated with silane-based size,is made to achieve
good compatibility with various resins.
Product Properties:
Easy chopping
Good strand integrity
Good dispersion
Low static
Excellent mold flow ability
Excellent mechanical properties.
Product Specification:
|
Product code |
Tex value
(tex) |
Filament
diameter(μm) |
Loss on
ignition(%) |
Stiffness
(mm) |
|
EC13-2400
EC13-4800
EC13-2400
EC13-4800
EC13-2400
EC13-4800 |
2400
4800
2400
4800
2400
4800 |
13-14
13-14
13-14
13-14
13-14
13-14 |
1.4±0.2
1.4±0.2
1.4±0.2
1.4±0.2
1.4±0.2
1.4±0.2 |
>130
>130
>130
>130
>130
>130 |
*Special products are according to customer's requirements.
Individual And Bulk Packaging:
Each cheese of EC is protected by a plastic bag,if
required,thermoplastic bag also can be used,than covered by a box
with the size of 278mm×278mm×273mm;net weight is 16.5kgs to 17.5kgs.
Each pallet which size is 1100mm×1100mm×120mm contains 3 or 4
levels of 16 cheeses.
Static stacking of the pallets is possible up to two high.
Vetrocreel packaging is available on request.
Storage:
EC roving should be stored dry and in its original packing.The best
conditions are temperature between 10℃ to 35℃ and at a relative
humidity between 35% to 55%.
|
|
