|
E Glass Spray up Roving
Introduction：
E-glass spray up roving is a multi-end product and uses a special
sizing. These products are suitable for FRP spray up forming
process. The typical products are boats, marine accessories,
automotive accessories, bathtubs, bathroom appliances, storage
tanks, etc. The roll should be pulled from the "inside" in most
cases, but can be pulled from the "outside" when a hard core is
used.
Product Characteristics：
1. Tex is stable with uniform strand splitting.
2. Medium stiffness, good choppability and good chopped strand
dispersion.
3. Low Fuzz.
4. Good anti-static properties.
5. Quick resin wet out and easy air release
Technical Specifications：
|
R2O Content
|
＜0.8%
|
|
Compatible Resin
|
Polyester
|
|
Filament Diameter
|
13 µm
|
|
Moisture Content
|
≤0.2%
|
|
LOI
|
1.2%±0.25%
|
Implementation Standards：
|
Bending Strength
|
289 MPa
|
|
Bending Modulus
|
9.8 GPa
|
|
Resin content
|
56.1 %
|
our product meets the requirements of Q/TTG003-1998 codes. The
product have obtained the quality certification of Norway Boat code.
Product Specifications：
|
Product Code
|
Tex
|
Roll Weight (kg)
|
|
ERS240-T132
|
2400
|
18 or 19
|
|
ERS310-T132
|
3100
|
18 or 19
|
*Special products are available according to customer's
requirements.
Packaging：
Roll diameter is 26 cm. Each roll weight is 18/19 kg. Rolls are
wrapped in plastic bags, then packed in individual cardboard boxes
or bulk packed. Each pallet of 110 cm by 110 cm can contain either
48 or 64 rolls. The weight of the 48-roll pallet is 864/912 kg. and
the 64 pallet is 1152/1216 kg.
|
